Structural Test Results

Our products were tested by an independent laboratory for structural load as well as for water penetration. The results are the following:

Picture Windows

Size of the Unit Tested: 72” x 72”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 12 PSF: No Entry
Uniform Load Structural: +/- 90.0 psf (over 185 mph)

Double Casements  

Size of the Unit Tested: 48” x 48”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 12 PSF: No Entry
Uniform Load Structural: +/- 120.0 psf (over 215 mph)

Double Hung

Size of the Unit Tested: 54” x 90”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 5.25 PSF: No Entry
Uniform Load Structural: +/- 75.0 psf (over 170 mph)

Sliding Doors

Size of the Unit Tested: 72” x 82 ½”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 12 PSF: No Entry
Uniform Load Structural: +/- 90.0 psf (over 185 mph)

French Doors

Size of the Unit Tested: 75 5/8” x 82”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 12 PSF: No Entry
Uniform Load Structural: +/- 90.0 psf (over 185 mph)

Entry Doors:

Size of the Unit Tested: 39 ¼” x 82”
Air Infiltration: Exceeds the performance level specified in AAMA/NWWDA 101/I.S. 2-97
Water Resistance WTP = 12.0 PSF: No Entry
Uniform Load Structural: +/- 105.0 psf (over 200 mph)